Pairs with grating
FRP Handrail System
Pultruded round-tube handrail in 1100 mm standard height (1000 mm and 1200 mm on request), supplied as a complete kit — posts, rails, bends, gates, kick plates and base plates — with resin color through the full section. No galvanizing, no annual repaint, no rust streaks on the grating below.
- 60.3 mm OD rails, 3.2 mm wall, pultruded with continuous rovings
- Top, mid and toe (kick) rails; 45° and 90° bends and rakes
- Self-closing safety gates for ladder access points
- Base plates for surface mount or side ( fascia) mount
- UV-stabilized; colorfast gray, yellow or safety orange
Component List
| Component | Specification | Standard spacing |
|---|---|---|
| Post | 60.3 mm OD × 3.2 mm wall, pultruded tube | 1 500 mm c/c (1 000 mm at corners and gates) |
| Top rail | 60.3 mm OD tube, internal sleeve joints | 1 100 mm above walkway |
| Mid rail | 60.3 mm or 42.4 mm OD tube | 850 mm above walkway |
| Kick plate | 3 mm pultruded flat, 100 mm high | Flush to deck, 6 mm max gap |
| Base plate | Molded FRP or 316 SS, 200 × 200 mm | 4 × M12 anchors |
| Gate | Self-closing, spring hinge, 600–900 mm clear | Ladder and stair openings |
Designed as a system
Handrail, grating, treads and ladders are manufactured on the same lines and quoted as one package — one delivery, one set of fixings, one supplier to hold responsible for interface dimensions.